Topography

Each sub is:

12 subwoofer with dual 4-ohm voice coils
fiber cone reinforced with Kevlar with poly-ether-ester surround
Venturi-effect design for maximum cooling of motor structure
power range: 100-500 watts RMS (250 watts per voice coil)
frequency response: 27-250 Hz

The amp is:

RMS Power @ 4-Ohm: 250W x 2
RMS Power @ 2-Ohm: 500W x 2
RMS Power @ 4-Ohm Bridged: 1000W x 1
Bridgeable A/B-Class amplifier topography
Ultra-Fi MOSFET outputs
Illuminated Hifonics logo
PWM MOSFET EXVP
SPC twin turbo torroids with Simpatico coil design
Fully adjustable Accu Cross crossovers include: 24dB low pass crossover, 12dB high pass crossover
Bass boost: 10dB variable bass equalization
Remote bass control included
RCA line outputs - permit amplifier Daisy-Chaining
4 Guage power connections
Dimensions (W/H/D): 15.75 x 9.45 x 2.4

Reynalda

i will be oredering this tomorrow probably so i was wondering if i got it right.

I’m getting two —
PIONEER TS-W3001D4 (TSW3001D4)
12 PREMIER CHAMPION Series PRO 3000W SUBWOOFER

Features:

o 12 Champion Series Pro
o Woofer Cone Material : Interlaced Carbon Fiber/Glass Fiber Reinforced
o Surround : Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
o Voice Coil : Dual 4-Layer, Long Voice Coil
o Voice Coil Wire : Copper
o Voice Coil Bobbin : Phenol Resin Coated Glass Cloth
o Projected Pole Yoke with Vented Pole
o Magnet : Double Stacked 110oz
o Aluminum Die-Cast Rigid Chassis
o Gasket 1-Piece Rubber
o Integrated Single-Sided Silver Compression Terminals
o Max Power : 3000 W
o Nominal Power Handling : 1000 W
o Frequency Response : 18 - 700 Hz
o Sensitivity : 89 dB
o 2 or 8 ohm Capability
o Recommended Enclosure Size : 0.50 ~ 1.0 Cubic Ft
o Mounting Depth : 7.5

hooked up to this amp at a 1ohm load –
HIFONICS BXi2008D MONO Class-D 2000W BRUTUS Series 25TH Anniversary AMPLIFIER

Features:

o 1-Channel Mono-Block Operation
o 650 Watts RMS x 1 @ 4-Ohms
o 1300 Watts RMS x 1 @ 2-Ohms
o 2000 Watts RMS x 1 @ 1-Ohms
o SUPER D-Class Amplifier Topography
o Ultra-Fi MOSFET Outputs
o Illuminated HIFONICS Logo
o PWM MOSFET EXVP (Exponential Vari-Power Supply)
o SPC Twin Turbo-Torroids with Simpatico Coil Design
o Fully Adjustable Accu Cross Crossover
+ 24dB Subsonic Filter (Adjust 15Hz~35Hz)
o Phase Shift Adjustments (0 to 180 Degrees)
o 24dB Low-Pass Crossover (Adjust 35Hz~250Hz)
o Bass Boost : Variable Equalization (+10dB @ 45Hz)
o Remote Bass Control Included
o Balanced Line Inputs with optional Hifonics MM-BLD-1
o Gold RCA Line Outputs
+ Permits Amplifier Daisy Chaining
+ 0.2V to 9V Signal Level
o 4-Gauge Power Connectors

* SPECIFICATIONS
o Amplifier Class : Class-D
o Number of Channels : 1-Channel
o Maximum Power : 2000 Watts
o RMS Power Output @ 4 Ohms : 650 Watts x 1-Channel
o RMS Power Output @ 2 Ohms : 1300 Watts x 1-Channel
o Bridged Power : N/A
o THD : 0.08%
o Signal-to-Noise Ratio (dB) : 95dB
o Frequency Response (Hz) : N/A
o Built-in Crossover : Yes
o High-Pass Crossover Frequency : N/A
o Low-Pass Crossover Frequency : 35Hz~250Hz
o Bass Boost : 0dB~10dB
o Bass Remote : Yes
o Fan Cooled : N/A
o Fuse Rating : 200A Dimensions (Width x Height x Length) Inches : 9.45 x 2.52 x 14.97
o Approximate Weight : 15.6 LBS

the sub woofers will go in this box –
HBX 12VEGA 12 Dual Ported MDF Sub woofer Box

I was told i needed a capacitor so i’m going to get this one-

SPL CP5.0 (CP50) 5-Farad 5000W Digital Power CAPACITOR

Features:

o Digital Hybrid Power Capacitor
o 5 Farad
o 24 Volts DC
o Blue LED Lights
o Brushed Aluminum with Black Mesh Jacket
o Chrome Mounting Brackets

This amp install kit –

EARTHQUAKE AK-5000 (AK5000 4-Gauge 5000W Complete Amplifier Installation KIT

* Includes:
o Red Power Wire : 17 ft : 4-Gauge
o Black Ground Wire : 3 ft : 4-Gauge
o Speaker Wire : 20 ft : 16-Gauge
o Blue Remote Turn On Wire : 16 ft : 16-Gauge
o Silver Twisted-Pair RCA Interconnect : 6 ft : Straight
o Black Split Loom : 6 ft : OD 8mm
o Gold Plated ANL Fuse Holder : ANL Fuse : 150 A
o 4 x 4 Gauge Gold O Ring Terminal : 2 Red / 2 Black
o 2 x 4 Gauge Gold U Ring Terminal : 1 Red / 1 Black
o 4 x 14-16 Gold gauge U Terminal for speaker terminals on amp : 2 red / 2 black
o 1 x 16-22 Gauge butt connector for remote turn-on wire : 1 red
o 1 x self tapping screw : 1 tinned
o 10 x black cable ties : 120mm long
o 1 x grommets in black

and this speaker wire:

AVS SPW12-50 12GA 50FT SPEAKER WIRE

Adrien

I going to get 2 Kicker CVR15 Dual 4-Ohm
http://akamaipix.crutchfield.com/products/2007/206/x2067C15VR4-f.jpeg
here is the info
# Sensitivity: 89.1 dB
# RMS Power Range : 500 Watts
# Peak Power Handling: 1000 Watts
# Impedance: Dual 4 Ohm
# Low Frequency response: 25 Hz
# High Frequency Response: 500 Hz

And the amp is going to be a
Hifonics ZXi 1006
http://www.sonicelectronix.com/pictures.php?id=6517
1 or 2 channel operation
250 watts RMS x 2 chan. @ 4 Ohms / 500 watts RMS x 2 chan. @ 2 Ohms / 1000 watts x 1 chan. @ 4 Ohms Bridged
Bridgeable A/B Class Amplifier Topography
Ultra-Fi MOSFET Outputs
DC, Short, Thermal Overload Protection
PWM MOSFET EXVP (Exponential Vari-Power Supply)
SPC Twin Turbo-Torroids with Simpatico Coil Design
Fully Adjustable Accu Cross
Crossover Includes:
* 12 dB Hi-Pass Crossover
* 24 dB Low-Pass Crossover

i think its going to sound ok since the subs are 500RMS
and the amp is 500RMS X 2 @ 2-Ohm
also im thinking in connecting the in parallel
http://i26.tinypic.com/9jq8m8.png
so that way the subs would be in a 2 Ohm load

let me know if its going to be a good system
also if the amp is ok

Bailey

The specs on the (2) Kicker Subwoofers:
Kicker 05CVR12-4
RMS Power Range:50-400 watts
Peak Power Handling:800 watts
Impedance: Dual 4 ohm

Specs on Hifonics BX605
1200 Watts 1-Channel Class A/B Monoblock Amplifier
A/B-Class Amplifier Topography
Ultri-Fi MOSFET Outputs
Complementary High Speed MOSFET Power Devices
MOSFET EXVP ( Exponential Vari-Power Supply)
SPC Twin Turbo Torroids with Simpatico Coil Design
Power and Protection LEDs
Gold RCA Inputs
RMS @ 4-Ohm: 1 x 150-Watts
RMS @ 2-Ohm: 1 x 300-Watts
RMS @ 1-Ohm: 1 x 600-Watts
Super D-Class Amplifier Design
Accu-Cross(TM) Crossover Controls: Low-Pass, Band-Pass / Full Hi-Pass Features
Adjustable Bass Equalization

OR

Hifonics BX1205D
1 x 1200-Watts Super D-Class Amplifier
* RMS @ 4-Ohm: 1 x 450-Watts
* RMS @ 2-Ohm: 1 x 900-Watts
* RMS @ 1-Ohm: 1 x 1200-Watts
* Super D-Class Amplifier Design
* Accu-Cross(TM) Crossover Controls: Low-Pass, Band-Pass / Full / Hi-Pass Features
* Adjustable Bass Equalization

Maryellen

I Plan On Getting 3 12” Kicker CompVR But Which 1 Will B The Loudest Dual 2 Ohms Or Dual 4 Ohms I Know Your Gonna Say That These Amps Have 2 Much Power But Tell Me Which 1 Will B Better Louder With More Bass. Okay Heres The Amps Below.

Power Acoustik PS1-4000D
4000W Max, Power Series Class D Monoblock Amplifier Product Description:

Power Series Class D Monoblock Car Amplifier
RMS Power Rating:
4 ohms: 1200 watts x 1 chan.
2 ohms: 1700 watts x 1 chan.
1 ohm: 2200 watts x 1 chan.
Max power output: 4000 watts x 1 chan.
Full regulated PWM MOSFET power supply
Wired remote bass level control included
LED power and protection indicators
Tuned Bass EQ (0-18 dB bass boost at 45 Hz)
Hi Speed Digital Circuitry
Preamp RCA outputs
4-Way Protection circuitry
Platinum-plated RCA level inputs
Platinum-plated screw terminals
Variable low-pass filter (50-150 Hz)
Subsonic Filter (15-40 Hz)
Frequency response: 15-150 Hz
Dimensions: 14.8L x 11.4W x 2.4H
4-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
Amplifier Specifications:

Amplifier Class D
Number of Channels 1 - Mono
RMS Power (4 ohms) 1200 watts x 1 channel
RMS Power (2 ohms) 1700 watts x 1 channel
RMS Power (1 ohm) 2200 watts x 1 channel
Bridged RMS Power Not Bridgeable
Peak Power Output 4000 watts x 1 channel
Minimum Impedance Unbridged 1 ohm
Minimum Impedance Bridged Not Bridgeable ohms
THD at Rated RMS Power .5%
Speaker Level Inputs No
Preamp Outputs Yes - 1 pair
Built-in Crossover Low-pass (LP)
High-Pass Crossover Frequency N/A
Low-Pass Crossover Frequency 50 - 150 Hz
Subsonic Filter 15 - 40 Hz
Signal-to-Noise Ratio 100 dB
Channel Separation N/A
Bass Boost 0 - 18 dB
Bass/Gain Remote Yes
Fan Cooled No
Fuse Rating 30A x 4
THIS IS THE END OF THE POWER ACOUSTIK MONO AMP UP NEXT IS THE HIFONICS MONO AMP I LEFT THIS MMESSAGE BECAUSE I USED ALL THE CAPS THE ONLY WAY I CAN FIT EVERYTHING ON HERE IS COPY PASTE SO LIKE I SAID THIS IS HE END OF THE AMP BELOW IS THE NEXT AMP THANKS FOR READING!Hifonics BXi 1606D
Brutus Series Class D Monoblock Amplifier (BXi1606D) Product Description:

Replaces BX1605D

1-Channel Mono-Block Operation
1100 watts RMS x 1 chan. @ 2 Ohms / 1600 watts RMS x 1 chan. @ 1 Ohm
Super D-Class Topography
Ultra-Fi MOSFET Outputs
Illuminated Hifonics Logo
PMW MOSFET EXVP (Exponential Vari-Power Supply)
SPC Twin Turbo-Torroids with Simpatico Coil Design
Fully Adjustable Accu Cross
Crossover Includes:
24 dB Subsonic Filter (Adjusts 15 Hz - 50 Hz)
Bass Boost: Variable Bass Equalization (+18 dB @ 45 Hz)
Remote Bass Control Included
Balanced Line Inputs with Optional Hifonics MM-BLD-1
Gold RCA Line Outputs
Permits Amplifier Daisy-Chaining
4 Gauge Power Connectors
Dimensions: 13.77L x 10.39W x 2.63H
1-year Sonic Electronix warranty

Amplifier Specifications:

Number of Channels 1 - Mono
RMS Power (4 ohms) 550 watts x 1 channel
RMS Power (2 ohms) 1100 watts x 1 channel
RMS Power (1 ohm) 1600 watts x 1 channel
Bridged RMS Power Not Bridgeable
Peak Power Output N/A
Minimum Impedance Unbridged 1 ohm
Minimum Impedance Bridged Not Bridgeable ohms
THD at Rated RMS Power 0.1%
Speaker Level Inputs Yes
Preamp Outputs Yes - 1 pair
Built-in Crossover Yes - LP
High-Pass Crossover Frequency N/A
Low-Pass Crossover Frequency 35 - 250 Hz
Subsonic Filter 15 - 50 Hz
Signal-to-Noise Ratio 95 dB
Channel Separation N/A
Bass Boost 0 - 18 dB
Bass/Gain Remote Yes
Fan Cooled N/A
Fuse Rating 160A (80A x 2)

Vincent

quantity - 1

Legacy 3D33M

# old Down Detachable Panel
# 3 Inch TFT Wide Display
# 16:9 or 4:3 Wide Display
# NTSC PAL Compatible
# Picture Brightness/Contrast/Chroma/Hue
# Preset EQ Mode
# USB Function
# Subwoofer Output
# AUX Input Function
# 4 Channel RCA Output
# 30 Preset Stations
# Support DVD/VCD/CD/MP3/WMA/JPG
# Repeat/Program/Random
# AM/FM Stereo Radio System
# Auto Memory Store/ Preset Scan
# MAX Output: 80 Watts x 4 Channels
# Card Size Full Function Remote Control

quantity - 2

PIONEER TS-W3001D4 (TSW3001D4) 12 PREMIER CHAMPION Series PRO 3000W SUBWOOFER

* 12 Champion Series Pro
* Woofer Cone Material : Interlaced Carbon Fiber/Glass Fiber Reinforced
* Surround : Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
* Voice Coil : Dual 4-Layer, Long Voice Coil
* Voice Coil Wire : Copper
* Voice Coil Bobbin : Phenol Resin Coated Glass Cloth
* Projected Pole Yoke with Vented Pole
* Magnet : Double Stacked 110oz
* Aluminum Die-Cast Rigid Chassis
* Gasket 1-Piece Rubber
* Integrated Single-Sided Silver Compression Terminals
* Max Power : 3000 W
* Nominal Power Handling : 1000 W
* Frequency Response : 18 - 700 Hz
* Sensitivity : 89 dB
* 2 or 8 ohm Capability
* Recommended Enclosure Size : 0.50 ~ 1.0 Cubic Ft
* Mounting Depth : 7.5

quantity - 1

HIFONICS BXi2008D MONO Class-D 2000W BRUTUS Series 25TH Anniversary AMPLIFIER

* 1-Channel Mono-Block Operation
* 650 Watts RMS x 1 @ 4-Ohms
* 1300 Watts RMS x 1 @ 2-Ohms
* 2000 Watts RMS x 1 @ 1-Ohms
* SUPER D-Class Amplifier Topography
* Ultra-Fi MOSFET Outputs
* Illuminated HIFONICS Logo
* PWM MOSFET EXVP (Exponential Vari-Power Supply)
* SPC Twin Turbo-Torroids with Simpatico Coil Design
* Fully Adjustable Accu Cross Crossover
o 24dB Subsonic Filter (Adjust 15Hz~35Hz)
* Phase Shift Adjustments (0 to 180 Degrees)
* 24dB Low-Pass Crossover (Adjust 35Hz~250Hz)
* Bass Boost : Variable Equalization (+10dB @ 45Hz)
* Remote Bass Control Included
* Balanced Line Inputs with optional Hifonics MM-BLD-1
* Gold RCA Line Outputs
o Permits Amplifier Daisy Chaining
o 0.2V to 9V Signal Level
* 4-Gauge Power Connectors

# SPECIFICATIONS

* Amplifier Class : Class-D
* Number of Channels : 1-Channel
* Maximum Power : 2000 Watts
* RMS Power Output @ 4 Ohms : 650 Watts x 1-Channel
* RMS Power Output @ 2 Ohms : 1300 Watts x 1-Channel
* Bridged Power : N/A
* THD : 0.08%
* Signal-to-Noise Ratio (dB) : 95dB
* Frequency Response (Hz) : N/A
* Built-in Crossover : Yes
* High-Pass Crossover Frequency : N/A
* Low-Pass Crossover Frequency : 35Hz~250Hz
* Bass Boost : 0dB~10dB
* Bass Remote : Yes
* Fan Cooled : N/A
* Fuse Rating : 200A Dimensions (Width x Height x Length) Inches : 9.45 x 2.52 x 14.97
* Approximate Weight : 15.6 LBS
* Warranty Information : 1 Year Warranty

quantity - 1

HBX 12VEGA 12 Dual Ported MDF Subwoofer Box

* High Quality 3/4 MDF Construction
* Gold Binding Post Terminals
* Color: Black
* Port Size : 2x 12 1/2
* Dimensions (WxHxD): 36 x 14 x 16
* Weight: 48 lbs

quantity - 1

EARTHQUAKE AK-5000 (AK5000) 4-Gauge 5000W Complete Amplifier Installation KIT

* Includes:
o Red Power Wire : 17 ft : 4-Gauge
o Black Ground Wire : 3 ft : 4-Gauge
o Speaker Wire : 20 ft : 16-Gauge
o Blue Remote Turn On Wire : 16 ft : 16-Gauge
o Silver Twisted-Pair RCA Interconnect : 6 ft : Straight
o Black Split Loom : 6 ft : OD 8mm
o Gold Plated ANL Fuse Holder : ANL Fuse : 150 A
o 4 x 4 Gauge Gold O Ring Terminal : 2 Red / 2 Black
o 2 x 4 Gauge Gold U Ring Terminal : 1 Red / 1 Black
o 4 x 14-16 Gold gauge U Terminal for speaker terminals on amp : 2 red / 2 black
o 1 x 16-22 Gauge butt connector for remote turn-on wire : 1 red
o 1 x self tapping screw : 1 tinned
o 10 x black cable ties : 120mm long
o 1 x grommets in black

quantity - 2

Hitron SPW18-100 18 Gauge 100FT Speaker Wire SPW18100

18 Gauge 100FT Speaker Wire Spool

Question 1 - Will this sound good

Question 2 - Is this a good amp choice for the Subs?

Question 3 - Will 200 ft. of Speaker Wire Be enough?

Question 4 - Will the Box work Well with the Subs?

Question 5 - What else do I need to install my amp and subs?

Question 6 - Will My Tweeters be hooked up to my amp or head unit?

Question 7 - Can i wire 2 4ohm sub woofers to a 1ohm load?

Dian

I have (4) Pioneer TSW302R subwoofers that are 150 watts rms and 800 watts max each. They are each 4 Ohms. I wanted to hook them up to a Crunch P1400.4 amp specs:
2/3/4 Channel operation
RMS Power @ 4 Ohm: 700W x 2
RMS Power @ 2 Ohm: 350W x 4
RMS Power @ 4 Ohm: 175W x 4
Bridgeable amplifier topography
Can I wire the subs in parallel so that the positive wires from subs 1 and 2 go to the positive channel 1 on my amp and the negatives go to the negative on amp channel 2. Then hook up the positive wires from subs 3 and 4 to positive channel 3 and negative channel 4. This should produce a total of four Ohms right? Thanks.

Diamond

I have 2 12 4ohm DVC Solobarics at 750w RMS and I’m trying to figure out the cheapest way to put them together. I’m going to go with a Hifonics amp, but I am trying to figure out if either one of these would be sufficient.

BXi1606D
1-Channel Mono-Block Operation
RMS Power (4 ohms) : 550 watts x 1 chan.
RMS Power (2 ohms) : 1100 watts x 1 chan.
RMS Power (1 ohm) : 1600 watts x 1 chan.
Signal-to-Noise Ratio 95 dB
Super D-Class Topography

Hifonics BXi2008D
Class D Monoblock Amplifier
RMS Power @ 4 ohms: 650 watts x 1
RMS Power @ 2 ohms: 1300 watts x 1
RMS Power @ 1 ohm: 2000 watts x 1
1-Channel Mono-Block Operation
Super D-Class Amplifier Topography

neither is 1 ohm stable
If I go with the Kicker zx1500 Should I wire it from 1 ohm or 4?

Lawerence

Im trying to get a nice budget system since i dont have alot of money.
This is the specs of the subs:
HIFONICS HFi12D4
RMS Power Range : 300 Watts
Peak Power Handling: 600 Watts
Impedance: Dual 4 Ohm
Diameter: 12 Inch
Sensitivity: 88 dB

And the amp:
Crunch P1100.2
1100W 2-Channel Powerzone Series Car Amplifier
RMS Power Range : 225-550 Watts
Number Of Channels: 2
1/2 Channel operation
RMS Power @ 4 Ohm: 1100W x 1
RMS Power @ 2 Ohm: 550W x 2
RMS Power @ 4 Ohm: 225W x 2
Bridgeable amplifier topography

So would this be a good amp for these subs? If not please tell me what i should look for in an amp for these subs.

Please dont tell me to get rockford or kicker or anyother brand. I do not care, im on a budget

Stefan

im getting 2 PIONEER TS-W3001D4 (TSW3001D4)
12 PREMIER CHAMPION Series PRO 3000W SUBWOOFER

Features:

o 12 Champion Series Pro
o Woofer Cone Material : Interlaced Carbon Fiber/Glass Fiber Reinforced
o Surround : Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
o Voice Coil : Dual 4-Layer, Long Voice Coil
o Voice Coil Wire : Copper
o Voice Coil Bobbin : Phenol Resin Coated Glass Cloth
o Projected Pole Yoke with Vented Pole
o Magnet : Double Stacked 110oz
o Aluminum Die-Cast Rigid Chassis
o Gasket 1-Piece Rubber
o Integrated Single-Sided Silver Compression Terminals
o Max Power : 3000 W
o Nominal Power Handling : 1000 W
o Frequency Response : 18 - 700 Hz
o Sensitivity : 89 dB
o 2 or 8 ohm Capability
o Recommended Enclosure Size : 0.50 ~ 1.0 Cubic Ft
o Mounting Depth : 7.5

with this amp - HIFONICS BXi2008D
MONO Class-D 2000W BRUTUS Series 25TH Anniversary AMPLIFIER

Features:

o 1-Channel Mono-Block Operation
o 650 Watts RMS x 1 @ 4-Ohms
o 1300 Watts RMS x 1 @ 2-Ohms
o 2000 Watts RMS x 1 @ 1-Ohms
o SUPER D-Class Amplifier Topography
o Ultra-Fi MOSFET Outputs
o Illuminated HIFONICS Logo
o PWM MOSFET EXVP (Exponential Vari-Power Supply)
o SPC Twin Turbo-Torroids with Simpatico Coil Design
o Fully Adjustable Accu Cross Crossover
+ 24dB Subsonic Filter (Adjust 15Hz~35Hz)
o Phase Shift Adjustments (0 to 180 Degrees)
o 24dB Low-Pass Crossover (Adjust 35Hz~250Hz)
o Bass Boost : Variable Equalization (+10dB @ 45Hz)
o Remote Bass Control Included
o Balanced Line Inputs with optional Hifonics MM-BLD-1
o Gold RCA Line Outputs
+ Permits Amplifier Daisy Chaining
+ 0.2V to 9V Signal Level
o 4-Gauge Power Connectors

* SPECIFICATIONS
o Amplifier Class : Class-D
o Number of Channels : 1-Channel
o Maximum Power : 2000 Watts
o RMS Power Output @ 4 Ohms : 650 Watts x 1-Channel
o RMS Power Output @ 2 Ohms : 1300 Watts x 1-Channel
o Bridged Power : N/A
o THD : 0.08%
o Signal-to-Noise Ratio (dB) : 95dB
o Frequency Response (Hz) : N/A
o Built-in Crossover : Yes
o High-Pass Crossover Frequency : N/A
o Low-Pass Crossover Frequency : 35Hz~250Hz
o Bass Boost : 0dB~10dB
o Bass Remote : Yes
o Fan Cooled : N/A
o Fuse Rating : 200A Dimensions (Width x Height x Length) Inches : 9.45 x 2.52 x 14.97
o Approximate Weight : 15.6 LBS

and the subs will go in this box : HBX 12VEGA
12 Dual Ported MDF Subwoofer Box

Features:

o High Quality 3/4 MDF Construction
o Gold Binding Post Terminals
o Color: Black
o Port Size : 2x 12 1/2
o Dimensions (WxHxD): 36 x 14 x 16
o Weight: 48 lbs

I also want these horn tweeters: Pyramid TW36
7 x 3 Wide Dispersion Horn Tweeter

Features:

o 7 x 3 Wide Dispersion Horn Tweeter
o Die Cast Metal Black Anodized Frame
o Frequency Response: 1.8-25kHz
o 75 Watts RMS/150 Watts Peak Power
o Ferro Fluid Enhanced
o 20 oz. Magnet Structure
o 4 Ohms Impedance
o Sensitivity: (2.38 v,Im) 93dB
o Pair in Gift Box
o Includes Compensation Capacitors

with this speaker wire: Hitron SPW18-100
18 Gauge 100FT Speaker Wire SPW18100

Features:

o 18 Gauge 100FT Speaker Wire Spool

And this Amp install Kit: EARTHQUAKE AK-5000 (AK5000)
4-Gauge 5000W Complete Amplifier Installation KIT

* Includes:
o Red Power Wire : 17 ft : 4-Gauge
o Black Ground Wire : 3 ft : 4-Gauge
o Speaker Wire : 20 ft : 16-Gauge
o Blue Remote Turn On Wire : 16 ft : 16-Gauge
o Silver Twisted-Pair RCA Interconnect : 6 ft : Straight
o Black Split Loom : 6 ft : OD 8mm
o Gold Plated ANL Fuse Holder : ANL Fuse : 150 A
o 4 x 4 Gauge Gold O Ring Terminal : 2 Red / 2 Black
o 2 x 4 Gauge Gold U Ring Terminal : 1 Red / 1 Black
o 4 x 14-16 Gold gauge U Terminal for speaker terminals on amp : 2 red / 2 black
o 1 x 16-22 Gauge butt connector for remote turn-on wire : 1 red
o 1 x self tapping screw : 1 tinned
o 10 x black cable ties : 120mm long
o 1 x grommets in black

Question 1: will this sound good?

Question 2: will my speaker wire and amp install kit work?

Question 3: can i wire those subs and box to a 1ohm load?

Questi

Gertrud